[China Glass Net] Quality inspection of glass partition wall At present, there is no unified national industry standard. Generally, the construction of the partition decoration company is first organized and accepted, and then the cooperative design institute or cooperative decoration company will accept the owner or decoration company and Party A. Acceptance, the main acceptance is the material quality (including frame and glass) and construction details (such as stainless steel partition glass glue treatment, etc.). As a professional Beijing partition company, Yifeng partition design Xiaobian here to propose to you a few glass partition wall details acceptance notice: 925 Silver Bracelet,925 Sterling Silver Bracelet,Sterling Silver Chain Bracelet,Unique Sterling Silver Bracelets Golden Forest Jewelry Limited , https://www.golden-forest.com
Stainless steel glass partition wall, one of the cost-effective glass partition walls, the market price is between 240-450 yuan / square meter, with its transparent lighting, simple and generous, fireproof and environmental protection, efficient fashion and other advantages won the majority of partition wall decoration customers Love, widely used in office partitions, office office partitions, school laboratory partitions, computer room partitions, factory partitions and other renovation areas.
Design, installation and acceptance of stainless steel glass partitions. In general, Yifeng partition company believes that there are two main aspects to consider:
First of all, we must pay attention to the quality of materials, mainly including three aspects: stainless steel specifications and thickness, glass thickness and whether it is fully tempered, the use of environmentally friendly glass glue;
Followed by the construction details, here also emphasize three points: whether welding or argon arc welding is in place and solder joint processing, whether the glass glue is even and thin, and in a straight line, the glass door is adjusted in place.
Of course, in terms of completion acceptance, the acceptance criteria of Yifeng partition combined with the design institute or cooperative decoration company are summarized as follows: steel frame firmness, brushed stainless steel thickness, spot welding point treatment, glass flatness and glass drilling. The qualification rate of the glue, etc., the steel frame refers to the main frame of the entire partition wall. The square steel and steel materials used must reach a certain thickness, and the design is based on the height and depth of the partition wall. The simpler method of acceptance is Shaking and feeling, the looseness is obviously unqualified, leaving a safety hazard. Commonly used in the office is 201 brushed stainless steel, there are many kinds of thickness, and the folding method is also different. It is believed that the standard of materials used by each partition wall company will be different, which results in different prices for the partition wall. For a price, the customer pays a penny. We also want him to know how it is spent. The 0.5-thick stainless steel is as thin as a piece of paper. We found that some of the partition companies are using it. Yifeng partition thinks that it is used. If the thin material is spot welding, it is easy to burn through. The more terrible thing is that it will leave serious safety hazards. It may not be found in a short time, but the tempered glass is clamped by the stainless steel card slot. This material is made on the partition wall. It is fooling people. Yifeng partition company recommends the use of 1.0 thickness brushed stainless steel, which is also the requirements of the quality supervision bureau for the formal construction of stainless steel partitions and acceptance specifications, of course, this includes design institutes, large decoration companies and regular partition companies are doing very well.
In addition, it is argon arc welding. After the steel frame is fixed, the brushed stainless steel is generally double-sided buckle, or it is connected with the square steel and then fixed by spot welding. No matter which one, professional welding technology and local grinding after welding It is one of the criteria for testing the success of a glass partition product quality.
Once again, Yifeng partition emphasizes that the glass used in the glass partition must be fully tempered safety glass. The non-tempered or semi-tempered glass must not enter the construction. Safety is always the primary consideration for both the company and the owner. Factors, more about the safety factors of glass partitions, please consult the Yifeng partition designer site inspection design, we work together to create a safe and practical office partition business space!
What is to be said later is the installation of glass products. First, the tempered glass will have a certain curvature. The longer the glass, the greater the curvature, and some of the curvature is not in one direction. This is an inevitable reality. This requires the workers to pay attention to the uniformity of the arc during installation, try to go in one direction, and use the quick-drying glass glue to adjust the glass together and evenly, so that the problem of the flat bottom of the glass can be basically solved. The finishing work of the partition wall installation is to hit the glass glue, which is a key part of the whole stainless steel glass partition wall, and it is also an important aspect to investigate the true professionalism of the glass partition installation master. It is not only the work on the surface, but also the rear hand that makes the glass partition wall more secure and safe. Professional skilled workers can achieve a pass rate of more than 95%, a straight line, uniform size, no convex depression, 3-4mm glass joint between the glass, no shadow glue, glass and steel frame silver gray glue, steel frame and white wall Porcelain white glass glue is used.
August 29, 2021