The first step: first put the quilt, duvet, down jacket to prepare the compressed things, wash and fold Step 2: Put the quilt, duvet, and down jacket into the vacuum compression bag. Step 3: Seal the seal with a sliding piece. Note that the friend of the hand pump should not seal the entire seal first. Leave a hole first, then try to squeeze out the air in the bag (it will be quick when you smoke). More, friends who use vacuum cleaners will see you like to pull), after extrusion, use the slide to force back and forth a few times to ensure that the seal is not leaking. Step 4: Remove the cover from the vacuum compression bag, put it away, don't lose it, and use it for a while. Step 5: Turn the valve counterclockwise, but don't screw it down, huh, huh The sixth step: start work, align the valve mouth with a hand pump, soak it hard, haha, generally take 3-5 minutes or so, some MM said a few times, did not reflect, huh, whisper, the vacuum cleaner must be 10 You can get it in seconds, and you have taken a few vacuums for 10 seconds, right! !嘿嘿 Step 7: It works, the bags are attached to the pillows inside, haha, flat pull Step 8: Then tighten the valve clockwise, tighten it, haha Step 9: The cover that you just don't lose is now used, put it on, haha, the compression is finished. It’s very easy to take it out, just pull the seal off and pull it, huh, huh. Honghai Boat Co., Ltd. , http://www.trollingmotors-china.com
August 11, 2018