To determine the quality of a pair of leather shoes, you need to look at both the appearance and the internal indicators. Since the internal indicators often need to use detection equipment, it is more practical for a consumer to identify the quality of leather shoes from the appearance. From the aspect of appearance, the quality of the leather shoes is mainly determined by the quality of the material of the leather shoes (including the upper, the sole, and the shoe) and the performance of the work. Winter Shoes,Hot Boots For Kids,Snow Shoes Changzhou Meihong Footwear Co.,Ltd , http://www.czmeihongshoes.com
(1) Upper (upper): The upper is one of the main components of leather shoes. For glossy shoes, it depends on whether it is soft and plump. After the hand presses on the upper, whether the loose surface phenomenon occurs. A good upper should be plump and soft, feel comfortable, uniform in gloss, and free from looseness. For the uppers of suede shoes, attention should be paid to check whether the hairiness is short and even, and the color tone should be the same. The shoe is part of the upper. It is used to reinforce the upper and prevent the deformation of the upper and improve the feeling of the foot. . Therefore, good materials in shoes (such as real leather shoes) should have good touch, breathability, and humidity, and not easy to decolorize. In the sewing, there should be no wrinkles and fat edges in the shoes.
(2) Insole: Normal men's leather shoes use insole rear half pad or heel pad. Women's leather shoes are covered with a full pad that covers the insole. The insole has the function of keeping the insole clean and covering the unevenness of the insole to improve the feeling of the foot. Therefore, the insole should have good suction and drainage. In doing work, the insole should be flatly adhered to the insole, and there should be no crumple.
(3) Outsole: From the outside, the state of bonding around the outsole should be closely bonded with no gaps, and the bottom surface should be flat.
(4) Footwear: Whether it is low-heeled or high-heeled, the first thing to look for is whether the cooperation with leather shoes is natural. For women's leather shoes with half high heels, the following two points are more important: First, the heel should be firmly installed on the inner bottom, and should not be shaken while moving forward and backward; second, the heel should not be smaller than the heel. Underside.
(5) Insole: Look at the material of the insole, the best leather. On the other hand, it is necessary to press the lumbosacrally by hand, which is equivalent to the part of the instep when the shoes are worn, and it is better that the silk does not move. Under the effect of this force, if the edge of leather shoes is deformed, the quality of the shoe is problematic.
(6) Stability: The leather shoes should be placed on the flat surface. The leather shoes should stand still immediately. This type of leather shoes is of good stability. This is one of the basic conditions for high-quality leather shoes.
(7) Side inspection: Put the shoes on the plane, the outer sole (forefoot) of the leather shoes and the plane contact point should be in the middle, and the toe should have appropriate warping head, the heel should be straight and the bottom should be completely on the plane.
(8) Frontal inspection: Look at the same height as the outsole to see if there are differences in the out-of-bottom inner-outer warpage dimensions. It should be basically consistent and balanced.
(9) Check from the back: The heel should be straight and the back stitches should be straight.
(10) Comparison of two shoes: After completing the above aspects of inspection, it is necessary to carefully compare the length, height and shape of the two shoes, whether they are consistent or symmetrical, and whether the brightness and color are the same.
August 10, 2018